NEW 3KG/2KG Electric Melting Furnace Gold Silver Metal Smelter Jewelry Tool 110V

Description

Specification: · Crucible Capacity: 2KG/3KG · Power: 1600W · Voltage: AC110V, 50Hz · Measurement accuracy: +0.5%FS · Working environment: 0-50°C, 30-85%RH · Max.Heat ing temperature: 1150℃/1100℃ · TemperatureControl system: the PID The PID module has two functions: to measure and to control the heating
Store category
Sign Up Now !
You may also like
Pro 2KG/3KG Electric Melting Furnace Gold Silver Metal Smelter Jewelry Tool 110V
Product Description
Type-1/2: 2KG Electric Digital Melting Furnace
NOTE
1. Be sure to check if the graphite pot is in good condition before using the machine.
2. If there is a crack, it is absolutely impossible to use it, or if it is too worn, it cannot be used.
3. The problematic graphite pot can easily cause the graphite pot to suddenly break during the melting process, and the metal leaks out, causing damage to the machine.
Specification
·
Crucible Capacity: 2KG
·
Power:
1600W
· Voltage:AC110V, 60Hz
· Measurement accuracy: +0.5%FS
· Working environment: 0-50°C, 30-85%RH
· Max.Heat ing temperature: 1150℃
· Capaci ty of the crucible:130.35cm3
· External dimensions of the crucible: diameter:6.5 Height: 12.5
· Internal dimensions of the crucible: diameter:3.8 Height: 11.5
· TemperatureControl system:the PID
The PID module has two functions:to measure and to control the heating
· Dimensions:( LxWxH) 31x36x37cm
· Shipping dimesions 38 x38 x42cm
· Weight : 11kg
· Shiping weight :13kg
Operation:
1.
Plug the device in the power source.
2.
Press the ON / OFF button.
3.
Set the temperature(smelting temperature)
Press the SET button: SV( =set value)flashes. Every single digit can be set:
to select the digit you want to change, press the "<"button. To change its value,
use the buttons "∨" "∧". To save the selected value, press SET again.
Notice:
If you don’t save the selected value,the device will automatically go
back to the main display mode without holding the value which was set after
30 seconds.
4.
The device is starting the heating process. The “OUT” light is lit until the
temperature reaches the chosen value.
5.
As soon as the temperature is reached,the device stops heating. The “OUT”
light flashes and the temperature remains constant.
6.
Cast the metal into the mold and put the crucible bac nto the heating chamber.
7.
Turn the furnace out as soon as the whole quantity of molten metal was used.
Control system:the PID
The PID module has two functions:to measure and to control the heating.
The temperature measurement in the heating coil is made at regular intervals.
The information is transmittde to the PID module as current value.If the
current value is inferior to the set value,the PID module makes the device
heat.If the current value is superior or equal to the set value,the PID module
stops the heating.
This cycle gets repeated at a 2-second-intervall.Therefore,a high grade
of precision is ensurde.
The advantages of the PID module in comparison to a normal thermostat
are the flexibility,the efficiency and the precision.
Thus,the energy consumption can be optimizde,and the material fatigue
can be compensated:Therefore.
Special attention:
· In order to ensure a long durability and a good function of your device,
we strongly advice to work less than 3 hours at once. please ensure to
stop for 30 mins after 2 hours of continuous work .
· Periodically check the intactness of the crucible,to avoid damages of
the heating coil.
· The maximal operating temperature tolerated by the melting furnace
is 1150 ℃, never exceed this value.
· Recycled gold or silver contain acid and alkali which may corrode the
heating element. If you want to melt that kind of metals, please open the
cover of the melting chamber with regularity to let the toxic substances
Evaporate.
IMPORTANT
:
The graphite crucible is only adapted
to melt gold,Silver,copper and other sev noble metals!
Type-3: 3KG Electric Digital Melting Furnace
AC 110V 3KG 1600W Electric Digital Melting Furnace Gold Silver Copper Graphite Furnace
NOTE:
1. Be sure to check if the graphite pot is in good condition before using the machine.
2. If there is a crack, it is absolutely impossible to use it, or if it is too worn, it cannot be used.
3. The problematic graphite pot can easily cause the graphite pot to suddenly break during the melting process, and the metal leaks out, causing damage to the machine.
Specification:
·
Crucible Capacity: 3KG
· Power: 1600W
· Voltage: AC110V,60Hz
· Measurement accuracy: +0.5%FS
· Working environment: 0-50°C, 30-85%RH
· Max.Heat ing temperature: 1100℃
· TemperatureControl system: the PID
The PID module has two functions: to measure and to control the heating
Operation:
1.Plug the device in the power source.
2.Press the ON / OFF button.
3. Set the temperature(smelting temperature)
Press the SET button: SV( =set value)flashes. Every single digit can be set:
to select the digit you want to change, press the "<"button. To change its value,
use the buttons "∨" "∧". To save the selected value, press SET again.
Notice: If you don’t save the selected value,the device will automatically go
back to the main display mode without holding the value which was set after 30 seconds.
4.The device is starting the heating process. The “OUT” light is lit until the temperature reaches the chosen value.
5. As soon as the temperature is reached,the device stops heating. The “OUT” light flashes and the temperature remains constant.
6. Cast the metal into the mold and put the crucible bac nto the heating chamber.
7. Turn the furnace out as soon as the whole quantity of molten metal was used.
Control system: the PID
The PID module has two functions:to measure and to control the heating.
The temperature measurement in the heating coil is made at regular intervals.
The information is transmittde to the PID module as current value.If the current value is inferior to the set value, the PID module makes the device heat.If the current value is superior or equal to the set value, the PID module stops the heating.
This cycle gets repeated at a 2-second-intervall. Therefore, a high grade of precision is ensurde.
The advantages of the PID module in comparison to a normal thermostat are the flexibility, the efficiency and the precision.
Thus, the energy consumption can be optimizde,and the material fatigue can be compensated.
Special attention:
· In order to ensure a long durability and a good function of your device,
we strongly advice to work less than 3 hours at once. please ensure to stop for 30 mins after 2 hours of continuous work .
· Periodically check the intactness of the crucible,to avoid damages of the heating coil.
· The maximal operating temperature tolerated by the melting furnace is 1100 ℃, never exceed this value.
· Recycled gold or silver contain acid and alkali which may corrode the heating element. If you want to melt that kind of metals, please open the cover of the melting chamber with regularity to let the toxic substances evaporate.
IMPORTANT:
The graphite crucible is only adapted to melt gold, Silver, copper and other sev noble metals!
Package includes:
1 x Melting Furnace
1 x Graphite Crucible
1 x Pliers
Type-4/5: 2KG/3KG Electric Melting Furnace
Specification & Feature:
* Condition: 100% Brand New
* Capable of melting up to
2 kilos / 3 kilos
of gold, silver and other metals.
* This is specially designed and constructed for melting metals for casting and alloying.
* Led display with touch-pad digital read out allows precision temperature control.
* Maximum temperature is 2012 ° F (1100 ° C).
* It takes 10-15 minutes to first warm up depending on the metal your melting and 10-15 minutes to fully melt your metal depending on the form of material. Shot or small parts melt faster than large bars or blocks.
* Grooved graphite crucible, which is specially designed crucible tongs, is designed for easy removal from the furnace.
* You can melt pure silver & gold or alloys such as sterling silver, 14k gold 18k gold up to pure.
* This furnace is capable of melting such metals: gold, silver
* Insulated lid holds heat in and keeps oxygen out for a cleaner melt.
* The crucible and crucibles tongs are included in the package.
* Voltage: AC110V
* Power:1400W (
ONLY 3KG Melting Furnace
)
Note:
1.This machine is only suitable for melting pure gold, pure silver, or some other metal materials that are pure, low acidic and the melting point should be less than 1100 ℃ （2012 ℉）. Otherwise, the graphite crucible or machine will be damage;
2. The connecting part of lid and main body is designed very flexible, please open or close the lid GENTLY.Otherwise, the inside white parts may be broken because they are made of quartz, which is very crispy;
3. When the machine has worked continuously for 3 hours, please turn it off to cool down for 30 minutes, this is good for the lifetime of the machine.
Scope of delivery:
1PCS Electric Melting furnace
1PCS 2KG/3KG graphite crucible
1PCS Power cable
1PCS Clamp
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On Jul-05-21 at 23:14:35 PDT, seller added the following information: